Grandstream Networks GXV3615WP_HD Manual de usuario descargar pdf (Pagina 39)

Grandstream Networks, Inc. GXV3615WP_HD User Manual Page 39 of 39

Firmware Version 1.0.1.51 Last Updated: 03/2012

RESTORE FACTORY DEFAULT SETTING

WARNING!

Restoring the Factory Default Setting will DELETE all configuration information of the camera. Please

BACKUP or PRINT out all the settings before approach to following steps. Grandstream will not take any

responsibility if you lose all the parameters of setting or cannot connect to your VoIP service provider.

FACTORY RESET

There are three (3) methods for resetting your unit:

Reset Button

Reset default factory settings following these four (4) steps:

1. Unplug the Ethernet cable.

2. Locate a needle-sized hole on the back panel of the camera above the power jack.

3. Insert a pin in this hole, and press and hold for about 15 seconds till reboot

4. Take out the pin. All unit settings are restored to factory settings.

Reset from Web Interface

This page allows user to configure dynamic network related parameters:

Figure 21: Factory Reset from Web Interface

1 2 ... 34 35 36 37 38 39

Sin comentarios

Grandstream Networks GXV3615WP_HD Manual de usuario Pagina 39