Grandstream Networks GXV-3500 Manual de usuario descargar pdf (Pagina 9)

GXV3500 Digital Video Encoder/Decoder

Firmware 1.0.1.38 Page 9 of 32

Grandstream Networks, Inc. 08/2011

Compliance

FCC Part15, Subpart B Class B;

EN 55022 Class B,

EN61000-3-2, EN61000-3-3,

EN 55024, EN60950-1; C-tick

AS/NZS CISPR 22, CISPR 24

Installation Guide

Minimum Recommended System Requirement

 Windows 2000 Server Professional, Windows XP, Windows Vista.

 CPU: Intel Pentium 4 or higher, 2 GHz.

 RAM: 1 GB (4 GB recommended for larger systems).

 Support for DirectX 8.0 and above.

Connect your GXV3500

Using the Power adapter as power supply

 Connect the video output of an analog camera to the VIN port on the GXV3500 using

a BNC (75Ω) cable.

 Connect an RJ 45 cable to the NETWORK port of the GXV3500

 Connect the other end of the RJ 45 cable to your network or PC directly

 Connect the bare wire marked as 12V from the power supply to the DC 12V plug on

the back of the GXV3500. Connect the negative wire to the GND plug.

 Connect the other end of the power supply to a wall outlet.

Using PoE as power supply:

 Connect the video output of an analog camera to the VIN port on the GXV3500 using

a BNC (75Ω) cable.

 Connect a RJ 45 cable to the NETWORK port of GXV3500

 Connect the other end of the RJ 45 cable to a PoE switch.

NOTE: If you are going to connect the device to a hub/switch/router, please use a

straight-through cable. A cross over cable should be used if you are going to connect the

device directly to a PC.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Sin comentarios

Grandstream Networks GXV-3500 Manual de usuario Pagina 9